这个的话还是建议大家尽量不要通用。即使用了，效果也不是很好。

因为，切铝的锯片和木工锯片安装的设备不一样，当然设备的转速也不一样。众所周知，摩擦起热，木头的导热能力很差，在锯片高速旋转下，热量会迅速集中在切割部位，所以容易烧锯片。

但是铝合金锯片的导热能力比木工锯片好，正常切割下，热量会快速传导到整个铝合金材料，所以不容易烧锯片。

由于铝材和木材料的材质不同，所以需要选择不同的锯片规格和齿形。为了防止粘连，切铝锯片一般使用梯平齿来切割，也就是常说的高低齿、平梯齿。而切木锯片多用左右齿。左右齿可适用于切割各种软材、硬材和刨花板等木材。

如果切割的材料是单双贴面人造板、防火板等材料，建议不使用左右齿，改用梯平齿的森工锯片，锯切时可减少贴面崩裂现象，可获得较高的锯切质量。

In this case, we still suggest that we try not to use it in general. Even if used, the effect is not very good.

Because the equipment installed on the aluminum cutting saw blade is different from that of the woodworking saw blade. Of course, the rotating speed of the equipment is also different. As we all know, due to friction heating, the thermal conductivity of wood is very poor. When the saw blade rotates at high speed, the heat will quickly concentrate on the cutting part, so it is easy to burn the saw blade.

However, the thermal conductivity of aluminum alloy saw blade is better than that of woodworking saw blade. Under normal cutting, the heat will be quickly transmitted to the whole aluminum alloy material, so it is not easy to burn the saw blade.

Due to the different materials of aluminum and wood materials, different saw blade specifications and tooth shapes need to be selected. In order to prevent adhesion, the aluminum cutting saw blade generally uses ladder flat teeth to cut, that is, often referred to as high and low teeth and flat ladder teeth. The wood cutting saw blade mostly uses left and right teeth. The left and right teeth are suitable for cutting all kinds of soft wood, hard wood, particleboard and other wood.

If the materials to be cut are single and double veneered wood-based panels, fireproof boards and other materials, it is recommended to use the forest industry saw blade with ladder flat teeth instead of the left and right teeth. During sawing, the cracking phenomenon of veneer can be reduced and higher sawing quality can be obtained.